Glass Infused Nylon Plastic Hidden Fastener Decking Clip - Bucket 700 Count

Find product details below for our ExoDek QuickClip hidden decking fasteners made from Glass Infused, Nylon Plastic.

We use Nylon 6/6 which is infused with glass in our injection molded clip products. Manufactured exclusively in the United States under U.S. patent US20200408230A1.

Boxes contain 175 clips, 175 screws, 1 torx driver bit and 1/8" shim stock for starter boards. Covers 100 SF of decking with 5/4x6 grooved deck boards.

Buckets contain 700 clips, 700 screws, 4 torx driver bits and 1/8" shim stock for starter boards. Covers 400 SF of decking with 5/4x6 grooved deck borads.

Starter boards must be face screwed or can be screwed and plugged. See installation instructions for more details.

Hidden fastener clips have become very popular over the past few years. Unfortunately, most of the clips available do not perform adequately. They just can't hold the product in place over time due to the natural movements in the materials - wood will swell in humid conditions and shrink in dry conditions, and composites and PVC will expand in hot weather and shrink in cold weather. Nova's resilient clips were designed specifically to handle movement in boards. Each individual clip can compress 1/8" to accomodate the typical expansion seen in hardwood and softwood boards.

Why Choose Nova’s Resilient QuickClips?

Our flexible resilient designs allow for the natural movement of wood, composite and PVC materials. These clips are able to handle up to 1/8" of widthwise expansion to ensure that your boards stay flat. Moisture or humidity changes in the environment will make wood swell or shrink over time.

Will These Clips Work for my Project?

Nova’s QuickClips can work with any type of wood including imported hardwoods, domestic softwoods, and thermally modified woods. The wood used must be milled to the specifications found on our website in order to fit our clips. We are happy to work directly with wholesalers, manufacturers and mills to provide the milling specifications and answer any questions regarding our system.